Double Sided Christmas Tree Tag | by Tracey McNeely

Thank you for coming by today for a little more Birch Press inspiration! Birch Press Design is participating in my 25 Days of Christmas Tags event once again as both a guest and a sponsor.
Christmas time there are so many things to put tags on. Whether it’s presents, bags, baking or hostess gift there are lots of reasons you could need one. Today I am using the Radiant Ornament layering dies to create a parcel tag that can go right from the parcel to the Christmas tree!
I have a short showing you how I created the ornament.

Two make the tag I cut two each of the Radiant Ornament Layer ARadiant Ornament Layer B and Radiant Ornament Layer C two times from red, green and turquoise cardstock. Using liquid glue that dries clear I applied glue to the top of layer C and lined up and placed layer B over top. Just wiggle the papers until all of the edges line up. I added glue to the back of Layer A before adding it to the top. I repeated these steps with the second set of dies–so I end up with two identical layered ornaments.
To make the double sided ornament you want to glue the back of one ornament to the back of the other ornament so that it mirrors the front and the back is identical to the front. Next the two ornament holders that were cut from silver sparkle paper were glued to the top of the ornament, both front and back making sure they lined up with one another. Again the beauty of using liquid adhesive.
A few of the Birch Press Design team members have created tags for Day 7 of my 25 Days of Christmas Tags event today and Birch Press Design is also sponsoring a giveaway over on my blog.
Your double-sided Christmas tree tag can be taken off the parcel and added right to the tree. Thank you so much for stopping in today and creating with me today!

Supplies

 

« »

© 2024 Birch Press Design.