Birch Press Design

Author: birch press

  • So Glad We’re Friends | By Allison Frazier

    So Glad We’re Friends | By Allison Frazier

    Hello, Birch Press friends! Today, I am sharing this beautiful muted card with a pop of sunshine yellow as the focal point. It’s like when the sun comes out after a dreary winter day! It features the new Morning Rose Contour Layers die and the Delicate Floral Buds Contour Layers die set. I also used the new Gilded Petalpoint Stencil Set.

    I started by stenciling the front of a light gray A2 card base. For the first stencil (with the largest openings), I used a light gray ink, just slightly darker than the card stock itself. For the second stencil, I used a medium shade of gray ink. And for the third stencil, I used clear Nuvo Glimmer Paste. I really love the tone on tone effect, but that Glimmer Paste really makes it special. This stencil actually matches up with the new Gilded Petalpoint Hot Foil Plate, but as you can see here, it looks great on its own, too!

    Next, I started making my die cuts. I used three shades of yellow card stock from the Memory Box “Sunny Orange” paper pack for the flowers. For the main flower, I cut two layers of each part of the flower so that I could stack them for dimension. I used two shades of gray for the leaves. By the way, the leaves come from the Tropical Hibiscus Contour Layers set. I love mixing florals and leaves from all of the different Contour Layers sets!

    And speaking of mixing up florals, I used the Delicate Floral Buds for my little flowers, again making two layers of each part of the flower. The Morning Rose actually comes with the “Triple Buds” dies, but I just wanted to mix things up today. I cut the stems/leaves for the Delicate Floral Buds from the darker shade of gray paper.

    Once I had all of my elements cut and the layers stacked, it was time to assemble the arrangement. This is probably the part that took the most time! Once I was happy with an arrangement, I started with the bottom by glueing the Delicate Buds first. Then I popped the main flower up on foam tape. This allowed me to then tuck the leaves in under that flower and still continue to make some last minute changes to the leaf arrangement. I finished the card by heat embossing a sentiment from the Lingo Thanks stamp set. I also added three fairy jewels to the center of the rose, just to tie in the shine from the stenciled background.

    Thank you so much for joining us today. I hope this card inspires you and brings a smile to your face! 

    Wishing you a crafty day,
    Allison


    Supplies


    57493 Morning Rose and Triple Buds Contour Layers
    57492 Delicate Floral Buds Contour Layers
    57486 Tropical Hibiscus Contour Layers
    42037 Gilded Petalpoint Stencil Set
    cl8143 Lingo Thanks clear stamp set
    sp1002 Sunny Orange 6×6 pack

    Supplies


    jwl001 Clear Jewels
  • Cotoneaster Greetings | by Toni M Maddox

    Cotoneaster Greetings | by Toni M Maddox

    Hello, Birch Press fans! Toni here with you today sharing a floral card that reminds me of my cotoneaster bush.

    The blooms of my cotoneaster aren’t very exciting but the resulting berries are prolific and gorgeous.

    I cut the Sylvan Berries Contour Layers from Memory Box Glitzy Glitter 6×6 cardstock and leftover cardstock I had used Brushos on once upon a time. I cut the Sylvan Leaves from Memory Box Lush Green 6×6 cardstock.

    I used the negative of the leaves diecut as a stencil with Distress Oxide Rustic Wilderness. What an easy way to add additional depth!

    I spattered a bit of Copics Opaque White and Distress Oxide Spray Vintage Photo before adding the sentiment.

    For that I used one of the Spellbinders Glimmer Satin Pastel hot foils with the Hugs Sugar Script Hot Foil Plate & Die. I wanted a smaller outline so cut the sentiment with the Sugar Script Big Hugs die. Cool shadow, right?!

    I hope you enjoyed today’s card and have a great rest of your week!

    Supplies

    57503 Sylvan Berries and Leaves Contour Layers

    57138 Big Hugs Sugar Script

    bpf513 Hugs Sugar Script Hot Foil Plate and Die Set

    sp1003 Lush Green 6×6 pack

    gp1007 Glitzy Glitter Pad

  • Find Joy Prime Peonies | by Crystal Komara

    Find Joy Prime Peonies | by Crystal Komara

    Hello readers and happy Friday to you! I hope you have fun (and creative) things planned for the weekend ahead. This is Design Team member Crystal Komara here with you today sharing this card using the Prime Peony Duo Contour Layers.

    Now, before I get into the details of how I made this card, I want to take a minute to appreciate the intricate WORK and time commitment involved with contour layering dies! If you think you’re just going to throw a card like this together and also juggle cooking dinner, doing a load of towels, tending to a puking cat and watching Friends reruns, oh no, no, no, my friend, that ain’t gonna happen! Contour layering dies take an extreme amount of concentration, patience and precision. I lack all three. At best, I’m spastic in thought, I have the patience of a 5-year old and I’m of the philosophy that “done is better than perfect!!” So, for me, while contour layering dies (when completed) are absolutely gorgeous, the journey getting there is kinda sheer torture.

    But, look at this card, ain’t she a beaut?!

    But, I learned a few helpful tips while making this card I want to share with you to help make your contour layering dies journey less painful. First, we are going to make the peonies using a variety of pink cardstocks.

    1. Don’t be in a rush – contour layering dies take time and if you know this ahead of time, it’s half the battle

    2. Organization – when you die cut the Prime Peony flowers, keep them in organized rows

    2. Follow the Directions (or the provided image) – they really do make sense in how you put the peony layers together!

    *Use a fine tip glue to adhere these intricate tiny layers together.
    *Tip – use a fine tip liquid glue for adhering tiny layers together.
    Die cut the larger word shadow from pink cardstock and the thinner word outline from white cardstock.
    Die cut the Linear Triangle from white cardstock.

    Because I had fully committed myself to making this one card (and not being interrupted by anything else) I found the process went much more smoothly. I love the end result SO much that I now intend to work more with the contour layering dies!

    Thanks for visiting and have a wonderfully creative day!

    Supplies

    57504 Prime Peony Duo Contour Layers

    57452 Find Joy and Outline

    SP1001 Berry Red 6×6 pack

    SP1003 Lush Green 6×6 pack

    57393 Linear Triangle

  • Sweet Jovial Blooms | By Seeka

    Sweet Jovial Blooms | By Seeka

    Hello and welcome! Seeka here today sharing a card featuring the Jovial Blooms and Leaves Contour Layers die set.

    I started off by die cutting the layers of the blooms out of four colors of pink cardstock. I glued the layers together and then set them aside. Next, I cut several leafy branches from green cardstock.

    For the background, I cut all three layers of the Tranquility layer die set from white cardstock and then glued them together. I glued the Tranquility piece to a white panel that I cut with the Pinpoint Radial Plate die.

    Next, I used a combination of glue, adhesive dots, and foam tape to adhere the blooms and leaves.

    I finished the card by adding a sentiment from my stash and then gluing the card front to a card base.

    Thank you so much for coming by!


    Supplies


  • Elegant Sprouting Crocus | Dilay Nacar

    Elegant Sprouting Crocus | Dilay Nacar

    Welcome, everyone! Dilay here sharing a clean and elegant floral card featuring the new Sprouting Crocus Contour Layer dies! 

    To begin, I die cut two Linear Triangles and adhered them to the top and bottom corners of an A2-sized card base. Next, I die cut the Kinsley Layers layer A in silver glitter cardstock and layers B land C in white, then adhered them together and onto the center of the card base, slightly overlapping the Linear Triangles. 

    Next, I die cut the Sprouting Crocus Contour Layers, ink blended the blooms in purple and pink and the stems in light and dark green, then adhered them together and onto the Kinsley Layers. 

    To finish, I foiled and die cut the Thank You Noted Script in purple foil and adhered it to the top of the card. I hope you enjoyed learning more about today’s card! Thank you so much for joining me!


    Supplies


    57523 Sprouting Crocus Contour Layers
    57393 Linear Triangle
    56123 Kinsley Layer Set
    bpf511 Thank You Noted Script Hot Foil Plate and Die Set
    gp1007 Glitzy Glitter Pad
  • Bright Florals with Sprays | By Natasha Vacca

    Bright Florals with Sprays | By Natasha Vacca

    Hello Birch Press friends! I am excited to be back up on the blog today sharing a colorful floral card using 2 new dies sets from Birch Press Designs latest release! For today’s card I am using the new Phlox Blooms and Contour Layers and the Sylvan Berries and Leaves Contour Layers. I had a lot of fun, so let’s get started!

    I love these beautiful new florals and leaves and couldn’t wait to create a card with lots of color! I am dreaming of warmer days! I started by selecting 3 colors of sprays from my collection (pink, yellow, and green). I sprayed each color onto a piece of Canson Mixed Media card stock. I allowed each panel of color to dry, spritzed with water, then used a paper towel to add texture. I repeated the process several times. I allowed each panel to fully dry, then die cut the florals and leaves.

    Once all the florals and leaves were die cut, I added dye ink to each of the die cut leaves, stems, and flowers. I applied the dye ink using a sponge dauber. On the leaves and stems I used a dark green and brown shade. On the yellow I used a dark orange and on the pink florals I used a deep shade of purple. Next I adhered the floral and leaf layers together using liquid glue. I set these aside to work on my card panel background.

    Next I chose a piece of kraft card stock from my stash. I ran the card stock through my die cut machine using the Memory Box 3D folder – Ringadings. I then lightly sanded the rings using a sanding tool. Next I added a bit of Distress Ink in Walnut Stain to a few of the rings. I then trimmed the panel using my Deckle Edge trimmer. I then used a distress tool to add a bit more distressing to the card panel. Next I added more Walnut Stain to all 4 sides of the panel. I then adhered the Ringadings card panel to an A2 card base.

    To complete the card I adhered the leaves and florals to the card panel using a combination of liquid and foam adhesive. I chose a Happy Birthday sentiment from my stash. I added a few Fairy Drops to a few of the leaves. I adhered these with liquid glue.

    I had a lot of fun creating today’s card! I hope you enjoyed it! I will be back soon!


    Supplies


    57503 Sylvan Berries and Leaves Contour Layers
    57507 Phlox Blooms and Leaves Contour Layers

    Supplies


    ef1015 Ringadings 3D Embossing Folder
    cld101 Clear Fairy Drops
  • You Are Loved | Dilay Nacar

    You Are Loved | Dilay Nacar

    Hello and welcome friends! Dilay here with you today to share a clean and simple leafy butterfly wreath card featuring the latest Pinpoint Contour Plate and You Are Loved Noted Script foil sentiment.

    To begin, I die cut two pieces of white card stock with the Pinpoint Contour Plate, then die cut one of them once more with the Mandala Card Frame die.

    Next, I selected a few colors of scrap card stock, die-cut each with the Tingly Tuft Flowers and Leaves Contour Layers, and adhered them behind the open circle, creating a simple rainbow wreath.

    I then adhered to the completed wreath panel over top of the solid Pinpoint Contour Plate die cut.

    I die-cut gold foil and glitter butterflies using the Simple Butterfly Contour Layers then adhered them over top of the leaves with foam tape. To finish, I gold foiled and die cut you are loved’ and adhered it to the center of the wreath. 

    I hope you enjoyed todays card. Thank you so much for stopping by!


    Supplies


    57490 Simple Butterfly Contour Layers
    57501 Tiny Tuft Flowers and Leaves Contour Layers
    57119 Mandala Card Frame
    bpf509 You Are Loved Noted Script Hot Foil Plate and Die Set
    57511 Pinpoint Contour Plate
    gp1003 Twinkling Jewel Glitter Pad
    fp1003 Rainbow Reflections Mirror Pad 6×6 pack
  • The Best Things | Rosemary Dennis

    The Best Things | Rosemary Dennis

    Hello everyone! Have you seen all the beautiful projects the design team has created with the February release? Absolutely amazing! With so many great products to pick from I had a hard time deciding what to create with, but knew for sure I was going to use the new Gilded Petalpoint hot foil plate. It is so beautiful and I can’t wait to try it with the matching stencils!

    I started off my card by foiling white cardstock with matte gold foil and then die cutting the panel down to fit my card front. The Gilded Petalpoint hot foil plate comes with the main plate and then a center circle plate. I foiled the panel with just the main plate so that the center would be open.

    Once I had the foiling done I had to decide which die set I was going to use and I settled on the Delicate Floral Buds Contour Layers die set. I die cut all the flowers from two shades of aqua blue cardstock and the stems and leaves from a bright lime green. To provide some interest I alternated the colors on the buds and love how they turned out. I centered the sentiment from the Classic Sentimental Wreath stamp set inside the circle and stamped it in black ink.

    Before adhering all my floral buds I decided to add some additional interest to the background by adding splatters of distress mica sprays in Fresh Balsam and Shiny Bauble. To make sure that I didn’t cover the background with too much of the mica sprays I simply added a small amount of each spray to an acrylic block, picked up the liquid with a small paint brush and then tapped it on. It worked perfectly and I love the subtle shine that the mica sprays provide.

    I arranged all the floral buds in a crescent shape around the sentiment and adhered them with liquid adhesive. To give the arrangement movement and lift I added the liquid adhesive only a portion of each stem. To finish off the arrangement I pulled out the Christmas Ornament Pop Up Easel die set and die cut the bow from matte gold cardstock from the Vintage Pastel Mirror Pad. I adhered that with liquid adhesive and then added an aqua colored fairy crystal from the Christmas Fairy Crystals pack to the center of the bow. Foam adhesive was used to adhere the panel to an off white cardstock base.

    I hope you enjoyed my project today. Have a lovely day!

    Supplies

    57492 Delicate Floral Buds Contour Layers

    57455 Christmas Ornament Pop Up Easel

    BPF516 Gilded Petalpoint Hot Foil Plate and Die Set

    CL8157 Classic Sentimental Wreath stamp set

    FP1002 Vintage Pastel Mirror Pad 6×6 pack

  • Alcohol Inked Phlox | By Allison Frazier

    Alcohol Inked Phlox | By Allison Frazier

    Hello, Birch Press friends! Today, I am sharing this card that I made completely out of alcohol ink backgrounds. It features the beautiful new Phlox Blooms and Leaves Contour Layers set. I have been dreaming of spring lately, and the colors on this card really make me happy.

    I made a bunch of alcohol ink backgrounds a few weeks ago and put them in my stash to be used at a later time. It is so fun to be able to pull them out whenever I am feeling inspired. This particular background is one of my favorites – aren’t the colors dreamy? I trimmed it down with the Pinpoint Contour Plate and adhered it to an A2 card base.

    For my flowers, I used a background that I had made with some vivid pink alcohol inks. Yupo paper cuts great with dies. For the second layer of the flowers, I used vellum. I knew I would be covering the center of the flowers, so it was okay to glue the vellum right in the center. The small, top detail was cut from the yellow areas of the panel that I had cut the background from.

    I popped the flowers up on the background with foam dots. I then created my sentiment using the Handwritten Thanks and Outline set. I used two different alcohol ink backgrounds to cut the greenish outline layer and the turquoise detail layer out. Once I was done adhering the sentiment to the card base, I embellished the background with Clear Fairy Drops.

    Thank you so much for joining us today. I hope this card inspires you and brings a smile to your face! 

    Wishing you a crafty day,
    Allison


    Supplies


    57507 Phlox Blooms and Leaves Contour Layers
    57511 Pinpoint Contour Plate
    57420 Handwritten Thanks and Outline

    Supplies


    cld101 Clear Fairy Drops
  • Hello, Spring! | by Toni M Maddox

    Hello, Spring! | by Toni M Maddox

    Hello, Birch Press fans! Toni here with you today sharing a spring-themed hello card using the new Sprouting Crocus Contour Layers.

    I sponged the crocuses (crocus? croci?) with Distress Oxide Mustard Seed, Wilted Violet and Villainous Potion. I also used a touch of Mowed Lawn on the leaves which I had cut from Memory Box Lush Green 6×6 Cardstock.

    On top of the Pinpoint Contour Plate I used the Delight Layer A and B sponged with Distress Oxide Peacock Feathers and Mustard Seed as a backdrop for the blossoms.

    I hot foiled the Hello Sugar Script Hot Foil Plate & Die with Spellbinders Satin Pastel Glimmer Hot Foil which is transparent so it is a lovely soft color that went perfectly with the purples used. That bit of shine is a fabulous touch as well.

    I hope you enjoyed today’s card and have a great rest of your week!

    Supplies

    57523 Sprouting Crocus Contour Layers

    BPf501 Hello Sugar Script Hot Foil Plate and Die Set

    57423 Delight Layer Set

    57511 Pinpoint Contour Plate

    sp1003 Lush Green 6×6 pack