Category: Embossing Powder

  • Forever Grateful | by Crystal Komara

    Forever Grateful | by Crystal Komara

    Hello crafty friends! This is Design Team member Crystal Komara here with you today sharing the first of a few fall themed pumpkin cards that I have made featuring the Adornment Pumpkin Set.

    The Adornment Pumpkin Layer Set is one of my go-to products for fall cards. I love the large size of the layering pumpkin. Plus, it comes together easily with only two dies – a solid inside layer and a thin outline layer. For this card, I combined it with a variety of other products from Birch Press Design to include:

    ~Phlox Blooms and Leaves Contour Layers

    ~Tiny Tuft Flowers and Leaves

    Card details:

    There is a lot to this card, so let’s break it down:

    1. To create the pumpkin, using the Adornment Pumpkin die, I die cut the large solid pumpkin from the 6″ x 6″ Gladiola paper pack from Memory Box Company. I die cut the outline layer from white cardstock. I adhered the two together with a fine tip liquid glue.
    2. Using the Phlox Blooms and Leaves contour layer set, I die cut a bunch of flowers from a mustard orange and rust colored cardstock. I also cut the inside of the flowers from chocolate brown cardstock and the center of of the flowers from gold glitter cardstock. For each flower, I layered the three colors togethers with a fine-tip liquid glue.
    3. Next I simply die cut a bunch of orange, yellow, mustard, gold and brown leaves from the Tiny Tufts Flowers and Leaves contour die and tucked them in and around the pumpkin.
    4. I splattered gold paint all over the card for some “distressing” or a “mixed media” look.
    5. Lastly, I stamped the sentiment “forever grateful” using the Brush Sentiment stamp set. I stamped the sentiment in Versamark ink and heat embossed it with white embossing powder. I used an oval punch to punch the sentiment out and adhered it to the card using foam adhesive for added dimension.

    I know at first glance that a lot of these intricate layered cards can seem intimating, but all it really entails is a LOT of die cutting. My little tip* – I don’t even count or measure as I’m die cutting, I just keep cutting until it seems like I have a lot. Any extra pieces can be used on the inside or saved for another card!

    Thanks for visiting and have a wonderfully creative day!

    Supplies

    57481 Adornment Pumpkin

    57507 Phlox Blooms and Leaves Contour Layers

    CL8158 Brush Sentiments clear stamp set

    57501 Tiny Tuft Flowers and Leaves Contour Layers

    SP1002 Sunny Orange 6×6 pack

    GP1006 Festive Glitter Pad

    Supplies

    PP1027 Gladiola Plaid 6×6 pack

  • Delicate Hello | by Rosemary Dennis

    Delicate Hello | by Rosemary Dennis

    Hello everyone! Rosemary here on the blog today. Can you believe that May is almost over? I can’t! Time is going by too fast. Today I’m sharing a card that I created by combining two contour die sets to get more mileage out of them. Let’s have a look at what I made.

    I have wanted to use the Birch Press Design Crystal Lingo stamp set for along time. The large image in the stamp set is a fun one and great for creating backgrounds. So one day I got out some pens I have that have liquid watercolors in them and created a ton of background. I started by embossing the crystal image on watercolor cardstock with white embossing powder and then coloring them with one color per image. Now I have multiple background that I can create with. As I was thinking about the card I wanted to make I decided to use two of the panels I created. I chose panels in a sort of coral pink and one in light yellow.

    Above are the two panels I used after I cut the pink one in half and die cut a piece from the light yellow one.

    Now it was time to decide on what dies to use. I knew I was going to use the small Vintage Hello Sentiment die set so I needed to keep the dies I used more on the delicate side. I went with the Phlox Blooms and Leaves Contour Layers and the Hillside Branch and Bramble Contour Layers die sets. The smaller flower in the Phlox Blooms set was perfect to add to the Hillside Branch die where the little berries are supposed to go. To color the flowers and branches I used the same watercolor pens that I used to create the backgrounds. The pinks on the flowers turned out darker than the background strip, but I think that is okay.

    I die cut all the pieces out of watercolor cardstock and colored them with the pens. Once they were dry I assembled them using liquid adhesive.

    Here is a close up of all the flowers after I assembled them and then arranged everthing on my card front. I had a little scrap of the pink background left over so I decided to die cut the bottom layer of the Hello Vintage Sentiment from that scrap and the top layer from white cardstock. They were together with liquid adhesive and adhered to the card front with a combination of liquid adhesive and small foam squares to finish off my card.

    I really like how my floral branch turned out and glad that I decided to try combining these two die sets. Thanks for stopping by and have a wonderful day.

    Supplies

    57507 Phlox Blooms and Leaves Contour Layers

    57550 Hello Vintage Sentiment

    57524 Hillside Branch and Bramble Contour Layers

    cl8155 Crystal Lingo clear stamp set

  • Lush Leaves with a Gelli Print | By, Natasha Vacca

    Lush Leaves with a Gelli Print | By, Natasha Vacca

    Hello Birch Press Friends, it is Natasha here and I am excited to be back on the blog today! Today’s card was inspired by a fellow design team member, Seeka! She shared a creative way to use embossing folders on a gelli plate and I had so much fun giving this a try! So let’s get started!

    For today’s card I started with the beautiful Lush Leaves Contour Layers die set! I die cut 2 leaves using an alcohol ink background from my stash. Once the leaves were die cut, I added Distress Ink to the edges and then adhered foam tape on the back of each leaf and set them aside. Next I die cut 2 more leaves using the Twilight Purple paper pack from Memory Box.

    Next I created a gelli print background using the Geometric Crystals embossing folder. I added paint to my gelli plate and then added a piece of paper with a dry embossed background using the embossing folder. I pressed the paper lightly onto my gelli plate, then I removed the background. My gelli plate now had small squares from the folder. I added a bit more paint, then pressed a new piece of paper onto my gelli plate. This was such a cool background and such a fun way to use my gelli plate!

    Next I trimmed the gelli plate panel using my deckle trimmer. I distressed the edges, then applied Distress Ink to each of the sides. I then adhered this onto a green panel and then added this to an A2 card base. Next I adhered the purple leaves, as well as my alcohol ink printed leaves to the card front. I used both liquid glue and foam tape.

    Next I die cut the new Big Hugs Vintage Sentiment using white card stock. I die cut this 2 times, then adhered each letter together with liquid glue. I then heat embossed a piece of white cardstock with a green/gold embossing powder. Once this was dry I die cut the hugs sentiment one more time. I then adhered the embossed letters on the top with liquid glue. On the shadow layer I added distress oxides, as well as distress ink to the edges. I adhered my sentiment, as well as a few gems from the Treasure Chest Fairy Gemstones collection.

    I had a lot of fun creating today’s card! I will be back soon with more inspiration!


    Supplies


    57547 Big Hugs Vintage Sentiment
    57521 Lush Leaves Contour Layers

    Supplies


    EF1016 Geometric Crystals 3D Embossing Folder
    GEM101 Treasure Chest Fairy Gemstones
  • Sending Love | By Natasha Vacca

    Sending Love | By Natasha Vacca

    Hello Birch Press friends, I am excited to be back up on the blog today sharing a fun and easy card using the Banner Heart Layering die set! So let’s get started!

    For today’s card I started with the Banner Heart Layering die set. I die cut layer A and C using white card stock. I then die cut layer B using the Festive Glitter paper pad. For the glitter layer I chose a dark blue shade from the paper pad. I then ink blended layer A and C using Distress Oxides. I used a combination of Distress Oxides: Saltwater Taffy, Picked Raspberry, Seedless Preserves, Shaded Lilac, and Villainous Potion. Once the layers were ink blended I set these aside to dry.

    Next on layer B, I wanted to add a bit more texture to the glitter paper pad. I used a combination of paper glaze, as well as embossing powder! I love the texture this provides. Once the other heart layers were completely dry, I added Gilded Foundry wax to sections of the heart. I then adhered all the heart layers together using liquid glue.

    Next I chose a gelli print from my background stash and dry embossed the background using the Ringadings embossing folder from Memory Box. I then applied white pigment ink to sections of the folder and ran it through one more time. I like this effect and the random texture this provides the dry embossed background. I allowed the ink to dry, then trimmed the panel using my paper trimmer for my card base.

    I completed my card by stamping a sentiment from the Contempo Greetings stamp and die set. I stamped the sentiment in purple, trimmed using the coordinating die, then applied foundry wax and ink on the edges as well. I then adhered the card panel, heart, and sentiment to my card base.

    Thank you so much for stopping by today! I will be back soon!


    Supplies


    57510 Banner Heart Layer Set
    CL8160 Contempo Greetings clear stamp set

    Supplies


    GP1006 Festive Glitter Pad
    EF1015 Ringadings 3D Embossing Folder
  • Banner Heart Love | by Crystal Komara

    Banner Heart Love | by Crystal Komara

    Hello readers and happy Monday! This is Birch Press Design Team member Crystal Komara here today continuing all with all the love-themed cards I seemed to have made in January. And, yes we’re still two weeks away from Valentine’s Day! Today’s card might be one of my favorites because of the ink splattered black background. A black background really allows for the colors to pop!

    Card details:

    The base of this A2 sized card is made from 80 lb. Neenah Solar White smooth cardstock. I cut a piece of black cardstock measuring 5″ x 3 3/4″ for the first base layer. I splattered this sheet of cardstock with white acrylic paint to add some dimension.

    Next, I created the two hearts that became the focal piece of this card. Using the Banner Heart Layering dies, I die cut Layer A from white cardstock, Layer B from baby pink cardstock and Layer C from a bolder magenta pink cardstock. I layered all three layers of each heart together with a fine-tip liquid glue.

    Lastly, I stamped the sentiment in Versamark ink on a thin strip of magenta cardstock. I heat embossed the sentiment with white embossing powder. I notched the left edge of the sentiment strip and adhered it to the card using 3M foam adhesive for added dimension.

    With a black background you could make those hearts in ANY color combination and I think it would still make for a beautiful Valentine’s Day (or love) themed card.

    Thanks for visiting and have a wonderfully creative day!

    Supplies

    57510 Banner Heart Layer Set

    56128 Viola Plate Layer Set

    8143 Lingo Thanks clear stamp set and die set

  • White on White | by Rosemary Dennis

    White on White | by Rosemary Dennis

    Hello everyone! Rosemary here on the blog today sharing a white on white (with a little bit of gray) design using one of the January release dies, Rose Leaves Contour Layers. I paired the new die set up with the older Morning Rose and Triple Buds Contour Layers dies and layer A from the Dazzle layering dies. White one white always creates a clean and classic look.

    As you can see that Rose Leaves Contour dies are fairly large and I felt they needed a larger floral design to compliment them. That is why I went with the Morning Rose and Triple Buds Contour Layers die set.

    The bottom layer of the larger leaves die was cut from the glitter cardstock and the top layer from white cardstock. For the smaller leaf cluster I die cut the bottom from white cardstock and the top layer from the glitter cardstock. Since the large rose has four layers I die cut two from white cardstock and two from glitter cardstock. Two layers of the buds were cut from the glitter cardstock and one layer from the white cardstock. I used liquid adhesive to secure all the layers together.

    I die cut the Dazzle layer A from a light gray cardstock and a piece of thicker white cardstock. The two layers were secured with liquid adhesive, added to a white cardstock base using more liquid adhesive and then allowed to dry for a bit before I added the rose, buds and leaves with more liquid adhesive. I trimmed some of the leaves off the larger leaf cluster to better fit the flow of the design.

    I finished off the card with a sentiment from the Open Studio Gracious Floral stamp set. I heat embossed the sentiment with white embossing powder on vellum. The sentiment was secured with rolled up glue dot hidden behind the letters and liquid adhesive.

    I hope you enjoyed today’s card. Thanks for stopping by and have a wonderful day!

    Supplies

    57493 Morning Rose and Triple Buds Contour Layers

    57522 Rose Leaves Contour Layers

    57000-DA Dazzle Layer Set

    cl5280 Gracious Floral Clear Stamp Set

  • Eloquent Butterfly Layered tag | By Natasha Vacca

    Eloquent Butterfly Layered tag | By Natasha Vacca

    Hello crafty friends, It is Natasha and I am excited to be up on the blog with you today! Today’s project combines the beautiful Eloquent Butterfly layered set, paired with beautiful papers from Memory Box! So let’s get started!

    I started by die cutting each layer (A and C) from the Eloquent Butterfly onto white cardstock. Once it was die cut, I added Distress Oxide Ink (Brushed Corduroy and Walnut Stain) to layer A and C. For layer B I die cut the butterfly using the Memory Box Glitzy Glitter pad using a piece of blue glitter paper. Then on layer B I added a couple colors of embossing powder. I do one color at a time, adding layers and not fully covering the butterfly with one color of powder. I also added a bit of embossing powder to layer A to add more interest and texture. I then adhered the butterfly together using liquid glue and set it aside.

    Next I started to work on my tag background using a pre-made tag from my stash. I then chose a few pieces of beautiful pattern paper from the Memory Box Magnolia Grove paper pad. I love these papers, they are so beautiful! I adhered the layers onto my tag, then dry embossed one of the papers using the Memory Box Ringadings embossing folder. Once this was dry embossed I tore the pattern paper to give a distressed look. I then added the same distress oxide inks to the paper. I added a bit more texture by applying an iridescent embossing powder to sections of the dry embossed paper. I then adhred the layer onto my tag,

    Next I added splatters to the tag panel using a brown spray from my stash. I allowed the panel to dry, then distressed the edges using my distress ink pad. I chose a sentiment from my stash and adhered this with foam tape, then adhered the butterfly to the tag using liquid glue.

    I completed the project with a twine at the top of the tag and a few gems from the Christmas Fairy Drops collection!

    Thank you so much for stopping by today! I will be back soon!


    Supplies


    57426 Eloquent Butterfly Layer Set

    Supplies


    pp1022 Magnolia Grove 6×6 pack
    gp1007 Glitzy Glitter Pad
    DDP101 Christmas Fairy Dewdrops
  • Warmest Wishes | By Natasha Vacca

    Warmest Wishes | By Natasha Vacca

    Hello Crafty Friends, I am excited to be back up on the blog today to share a vintage feel holiday card with you! For today’s card I am using 2 of the latest dies: Jolly Holly Contour Layers and Revello Ornament. Let’s get started!

    I started by die cutting the Revello Ornament using white card stock. I die cut each layer (A, B, and C), then adhered them together with liquid glue. Next I die cut the Jolly Holly Contour Layers using the Memory Box paper pads: Lush Green and Berry Red.

    Once the leaves and the berries were die cut, I added distress oxide inks to each layer. I used several colors for each, then added water droplets to the leaves and picked up some color using a paper towel. Once all the layers were dry, I adhered them together with liquid glue and set them aside to dry. I also die cut the bow and ornament topper from the Christmas Ornament Pop Up Easel die set. I heat embossed the bow using a weathered gold embossing powder.

    Next I started to work on my background using a piece of Wood Grain Paper in the color Cream. I used distress oxides to create a vintage inspired background. Once I was done inking the background I used my deckle trimmer to cut down the panel. I then distressed the edges using my distress tool and distress ink.

    I completed the card by adhering the wood grain panel onto an A2 card base. I then adhered the leaves, berries, ornament, bow and topper using a combination of liquid glue and foam tape. I also added a piece of gold twine for the ornament. I completed the card using a sentiment from the Glad Tidings stamp set.

    I had a lot of fun creating today’s card and I hope you enjoyed it! I’ll be back soon!


    Supplies


    57512 Jolly Holly Contour Layers
    57464 Revello Ornament Layer Set
    57455 Christmas Ornament Pop Up Easel
    CL8164 Glad Tidings clear stamp set

    Supplies


    sp1003 Lush Green
    sp1001 Berry Red
    SH44002 Cream Woodgrain Paper Pack
  • Just for You Mixed Media Tag | By Natasha Vacca

    Just for You Mixed Media Tag | By Natasha Vacca

    Hello Birch Press Friends, I am excited to be back on the blog today sharing a mixed media tag using 2 new dies from the latest collection: Oval Leaf Branches Contour Layers and Budding Twigs Contour Layers. So let’s get started!

    I started by die cutting the branches and twigs from the Oval Leaf Branches Contour Layers and Budding Twigs Contour Layers die sets. I die cut them from 2 shades of cardstock from the Stormy Blue and Fresh Aqua collection from the Memory Box paper pads. Once all the layers were die cut I added a bit of color to each layer using distress oxides. I then spritzed them with water and used a paper towel to pick up some of the color.

    Next I added embossing powder to all the die cuts. I applied embossing ink, then powder, and heat set them with my heat tool. I did wipe off some of the powder before heat setting them for a distressed look. I set the die cuts aside to work on my background.

    For the background I chose a gelli print from my stash and trimmed it into a tag. Next I ran the tag through my die cutting machine with the Ringadings 3D embossing folder. I then applied dye ink to one side of the folder and ran it through the machine again. Next I added embossing ink to the folder and ran it through one more time. I then added a gold embossing powder to some sections of the background and heat set it with my heat tool.

    Next I inked up the edges of the tag as well as some areas on the top of the tag with distress ink. I then determined the placement for the branches and the twigs. I adhered them with liquid glue and foam tape.

    Next I stamped the sentiment from the Gracious Floral stamp and die set. I completed the tag with a bit of cheesecloth and twine at the top of the tag. I adhered the sentiment with foam tape to complete the tag.

    Thank you so much for stopping by today! I will be back soon!


    Supplies


    57525 Oval Leaf Branches Contour Layers
    57529 Budding Twigs Contour Layers

    Supplies


    cl5280d Gracious Floral Clear Stamp and Die Set
    ef1015 Ringadings 3D Embossing Folder
    sp1004 Fresh Aqua
    sp1006 Stormy Blue
  • just for you | by Rosemary Dennis

    just for you | by Rosemary Dennis

    Hello everyone! Rosemary here on the blog today and I’m sharing another mixed media type card that I created using the new Forest Canopy Layer die set along with a sentiment from the Memory Box Open Studio Gracious Florals stamp and die bundle.

    The new Forest Canopy Layers die set is just gorgeous and there are so many ways that it can be used. I guess I went with a little more of a fallish feel for my card. I used lots and lots of distress sprays and mica sprays for the different layers. You can see all the sprays I used in the next photo.

    After I created all my panels with the different sprays I let them dry. Once dry there were die cut with the different layering dies. I also created the blue background panel and then die cut that with a rectangle die that fits exactly behind the Forest Canopy layers!

    There are dies in the Forest Canopy Layers set that die cut all the little berries and layering leaf pieces. I used liquid adhesive to adhere those to the layer “A” die cut that I had cut from a panel that was sprayed with a walnut stain and Burning Embers distress mica spray to give the look of the branches. Adhering all the layers together can be a bit tricky, but I have a tip to share that will make it much easier. I use my scoring tool to help with alignment.

    I placed the blue background panel in the corner of my scoring tool, apply liquid adhesive to the back of each layer and then carefully place each layer on top. Using liquid adhesive is also helpful in these instances as it gives you a little bit of time to make sure that you have everything lined up. Once I had all my layers adhered I used the scoring tool to add the piece to my card base, as well.

    I finished off the card with a sentiment from the Gracious Floral stamp set that I heat embossed using good embossing powder on vellum cardstock. I wanted the sentiment to stand out against all the layers of berries and leaves, but also not take away from the layers! I thought using vellum cardstock worked perfectly!

    I hope you enjoyed today’s project. Thanks for stopping by and have a lovely day!

    Supplies

    57534 Forest Canopy Layer Set

    Supplies

    CL5280D Gracious Floral Clear Stamp and Die Set