Tag: contour layers

  • Framed Crocus | By Seeka

    Framed Crocus | By Seeka

    Hello and welcome! Seeka here today sharing a card featuring the Sprouting Crocus Contour Layers die set.

    I started off by creating seven crocuses in shades of purple and blue cardstock (some nice options are available in the Ocean Blue and Twilight Purple 6×6 paper packs). I used light purple and blue cardstock for the flowers’ centers, and then used a small blending brush to ink blend a bit of darker purple and darker blue inks towards the bases of those pieces. The result is a bit of shading and dimension at the base of the inner petals of each flower. Next, I cut the leaves from green cardstock and then used glue to adhere the pieces of each flower together.

    For the background, I used the Pinpoint Radial Plate to cut a piece of white cardstock. Then I used a circle die from my stash to cut out a window from the panel. Next, I blended an aqua ink over a 4.25″ x 5.5″ panel of white cardstock, concentrating the color towards the bottom of the panel and letting it fade up towards the top. Using foam tape, I adhered the window panel to the aqua panel.

    To finish the card, I tucked the blooms into the window and then used foam tape to hold them in place. I added a small sentiment from my stash and then glued the card front to a top-folding card base.

    Thank you so much for visiting!


    Supplies


    57384 Pinpoint Radial Plate
    57523 Sprouting Crocus Contour Layers
    SP1005 Ocean Blue 6×6 pack
    SP1008 Twilight Purple 6×6 pack
  • You Are Loved Easter Egg | by Crystal Komara

    You Are Loved Easter Egg | by Crystal Komara

    Hello readers and happy Tuesday! This is Design Team member Crystal Komara here with you today sharing a beautiful Easter card for the upcoming holiday using the Petal Egg Layer Set and a few other products from Birch Press Design.

    Card details:

    The base of this A2 sized card is made from Neenah Solar White Smooth cardstock. For the first 5 1/4″ x 4″ layer, I ran a piece of the same Neenah white cardstock through the Blooming 3D embossing folder by Memory Box Co (a sister company of Birch Press Design).

    Next, I created the layers of the Easter egg from the Petal Egg Layer set:

    Layer A – the top layer was die cut from white cardstock.
    Layer B – the middle layer was die cut from yellow glitter cardstock.
    Layer C – the bottom layer was die cut from a darker yellow cardstock.
    I fussy cut the base or bottom layer of the egg in yellow cardstock, so that it would help the egg standout against the white background.

    I adhered all four layers of the egg together using a fine-tip liquid glue. Once this was dried, I placed the egg in the center of the card. Then I used the Tiny Tuft Flowers and Leaves Contour dies. I cut the leaves from two different colored green cardstock and the flowers from both yellow cardstock and yellow glitter cardstock.

    I adhered the leaves and flowers to the lower right side of the egg using a fine-tip liquid glue.

    Using the You Are Loved Noted Script heat foil plate and die, I heat foiled the sentiment in gold foil on black cardstock. I used the coordinating die to die cut the sentiment out and adhered it over the egg using 3M foam adhesive for added dimension.

    I hope you have enjoyed today’s card! Thank you for visiting and have a wonderfully creative day!

    Supplies

    57369 Petal Egg Layer Set

    BPF509 You Are Loved Noted Script Hot Foil Plate and Die Set

    57501 Tiny Tuft Flowers and Leaves Contour Layers

    SP1002 Sunny Orange 6×6 pack

    GP1008 Majestic Hues Glitter Pad

  • Find Joy Prime Peonies | by Crystal Komara

    Find Joy Prime Peonies | by Crystal Komara

    Hello readers and happy Friday to you! I hope you have fun (and creative) things planned for the weekend ahead. This is Design Team member Crystal Komara here with you today sharing this card using the Prime Peony Duo Contour Layers.

    Now, before I get into the details of how I made this card, I want to take a minute to appreciate the intricate WORK and time commitment involved with contour layering dies! If you think you’re just going to throw a card like this together and also juggle cooking dinner, doing a load of towels, tending to a puking cat and watching Friends reruns, oh no, no, no, my friend, that ain’t gonna happen! Contour layering dies take an extreme amount of concentration, patience and precision. I lack all three. At best, I’m spastic in thought, I have the patience of a 5-year old and I’m of the philosophy that “done is better than perfect!!” So, for me, while contour layering dies (when completed) are absolutely gorgeous, the journey getting there is kinda sheer torture.

    But, look at this card, ain’t she a beaut?!

    But, I learned a few helpful tips while making this card I want to share with you to help make your contour layering dies journey less painful. First, we are going to make the peonies using a variety of pink cardstocks.

    1. Don’t be in a rush – contour layering dies take time and if you know this ahead of time, it’s half the battle

    2. Organization – when you die cut the Prime Peony flowers, keep them in organized rows

    2. Follow the Directions (or the provided image) – they really do make sense in how you put the peony layers together!

    *Use a fine tip glue to adhere these intricate tiny layers together.
    *Tip – use a fine tip liquid glue for adhering tiny layers together.
    Die cut the larger word shadow from pink cardstock and the thinner word outline from white cardstock.
    Die cut the Linear Triangle from white cardstock.

    Because I had fully committed myself to making this one card (and not being interrupted by anything else) I found the process went much more smoothly. I love the end result SO much that I now intend to work more with the contour layering dies!

    Thanks for visiting and have a wonderfully creative day!

    Supplies

    57504 Prime Peony Duo Contour Layers

    57452 Find Joy and Outline

    SP1001 Berry Red 6×6 pack

    SP1003 Lush Green 6×6 pack

    57393 Linear Triangle

  • Sweet Jovial Blooms | By Seeka

    Sweet Jovial Blooms | By Seeka

    Hello and welcome! Seeka here today sharing a card featuring the Jovial Blooms and Leaves Contour Layers die set.

    I started off by die cutting the layers of the blooms out of four colors of pink cardstock. I glued the layers together and then set them aside. Next, I cut several leafy branches from green cardstock.

    For the background, I cut all three layers of the Tranquility layer die set from white cardstock and then glued them together. I glued the Tranquility piece to a white panel that I cut with the Pinpoint Radial Plate die.

    Next, I used a combination of glue, adhesive dots, and foam tape to adhere the blooms and leaves.

    I finished the card by adding a sentiment from my stash and then gluing the card front to a card base.

    Thank you so much for coming by!


    Supplies


  • Purple Wispy Blooms | by Crystal Komara

    Purple Wispy Blooms | by Crystal Komara

    Hello friends! This is Design Team member Crystal Komara here with you today sharing my passion for the color purple! I used the Wispy Blooms Contour Layering Dies to create these two monochromatic cards, however, you could re-create them in any color imaginable and have a rainbow assortment to choose from.

    For this first card, I used a piece of 80 lb. Neenah Solar White Smooth cardstock as the base of my card. I also cut a 5 1/4″ x 4″ piece of the same white cardstock for the first layer. I ran this sheet of cardstock though my Big Shot using the Blooming 3D embossing folder (from Memory Box). I die cut one large white oval circle and adhered it to the center of the card.

    Using the Wispy Blooms Contour Layering dies, I cut multiple flowers from three different purple colors of cardstock in the 6″ x 6″ Twilight paper pack. I die cut the stems from two shades of green cardstock found in the 6″ x 6″ Lush Green paper pack. I adhered all the flowers together with a fine-tip liquid glue. I adhered the flowers to the center of the scalloped circle to create one giant bouquet. Lastly, I stamped the sentiment “thinking of you” in purple ink on a thin strip of white cardstock. This sentiment is from the Classic Sentimental Wreath stamp set.

    Because I had so many flowers leftover, I decided to create a second card using them, rather than waste them:

    The base of this A2 sized card is also made from 80 lb. Neenah Solar White Smooth cardstock. I embossed a 5 1/4″ x 3″ piece of the same white cardstock using the Blooming 3D embossing folder (from Memory Box) and used a 5 1/4″ x 2″ piece of purple plaid paper for the other side. This paper is from the Spring Plaid slim paper from Memory Box. I die cut a large scalloped oval from Twilight cardstock and a smaller white oval for the center. I stamped the sentiment “hoping today is as wonderful as you are” in purple ink on the white oval. This sentiment is from the Kind Hearts clear stamp set. I adhered some of the leftover flowers into this white oval frame. I found that more than three flowers was too much, so I limited it to just the three.

    I hope you have enjoyed these cards! Thank you for visiting and have a wonderfully creative day!

  • I Miss Your Face | by Crystal Komara

    I Miss Your Face | by Crystal Komara

    Hello crafty readers! This is Design Team member Crystal Komara here with you today and I am SOooooo excited to share today’s card with you! This card features the Wispy Blooms dies, part of the all-NEW Contour Layering products from Birch Press Design.

    Now, I’m not gonna lie, you’re going to take one look at this AH-mazing garden of rainbow delight and be WOW’d! Then, you’re gonna take a second look and say “wait, did she really die cut ALL those flowers? Is she craaaaazyyyy?!” Yes and yes! : ) Do I have the patience of a saint? No. Not at all. In fact, I typically shy away from oodles of die cutting (that’s all you, Jennifer McGuire!) but once I started and saw where this card was going, it was SO worth it!

    Card details:

    Yeah, so the basic gist of it, just keep die cutting flowers in ALL the colors of the rainbow! Then, when you think you’re gonna go insane, start adhering all the layers together! But, wait. . . there’s more! You’ve still got stems to die cut and adhere!

    P.S. – I’ve linked all the paper pads I used in the supply list at the bottom of this post.

    Start by die cutting LOTS of flowers in all the colors of the rainbow!
    Adhere the flower layers together.
    Die cut the stems.
    Adhere the stems to the flowers.
    Completed flowers with stems.

    The base of this slimline card measures 8 1/2″ x 3 1/2″. I use 80 lb. Neenah Solar White Smooth for all my white cardstock. Slimline cards are designed to fit inside a regular #10 business envelope and require no additional postage. I cut an 8 1/4″ x 3 1/4″ piece of white cardstock and ran it through a basketweave embossing folder, then I began to adhere all the flowers to the card in a ROYGBIV pattern. Using the Contempo Greetings stamp set I stamped the sentiment in Versamark ink on black cardstock. I heat embossed the sentiment with white embossing powder and then I used the coordinating Contempo Greetings die to die cut it out. Lastly, I adhered the sentiment to the card using 3M foam adhesive for added dimension.

    So sure, this card a LOT of die cutting and piecework, but the end result is gorgeous and I would do it all over again! Thanks for visiting and have a wonderfully creative day!

    Supplies

    57506 Wispy Blooms Contour Layers

    SP1001 Berry Red 6×6 pack

    SP1002 Sunny Orange 6×6 pack

    SP1003 Lush Green 6×6 pack

    SP1005 Ocean Blue 6×6 pack

    SP1004 Fresh Aqua 6×6 pack

    SP1008 Twilight Purple 6×6 pack

    8160 Contempo Greetings clear stamp and die set