Tag: layered die

  • Autumn Arista Layers | By Seeka

    Autumn Arista Layers | By Seeka

    Hello and welcome! Seeka here and today I’m sharing a card featuring the Arista Layer die set in warm autumn colors.

    I started off by die cutting the three layers of the Arista medallion. The detail layer A is cut from a persimmon color, the middle layer B from white cardstock, and the layer C from a medium orange cardstock. I glued and layered the three pieces together and then cut a solid circle from an orange-y yellow cardstock and glued it to the back of the medallion. Some great color options are available in the Sunny Orange 6×6 paper pack.

    Next, I used the Pinpoint Radial Plate die to cut a panel of white cardstock. I glued the medallion to the panel and then added deep and light orange embellishments. To finish, I added a sentiment from my stash and glued the card front to a card base.

    Thank you so much for visiting!


    Supplies


  • Merry Christmas | By Sandhya Iyer

    Merry Christmas | By Sandhya Iyer

    Hello, my dear friends! Welcome back to another card post from me, Sandhya. For today’s card, I used the Aurora Snowflake Layering die set and the Merry Christmas Sugar Script die. I used some shimmery sprays to add to the magical appeal of my holiday card.

    I started by die-cutting all three layers of the Aurora Snowflake dies out of watercolor paper. Next, I picked out Bachelor Button Blue and Galactic Teal Starburst sprays from. Lindy’s Gang. I placed the Snowflake Layer B and a larger piece of watercolor cardstock on my craft mat and sprayed away. The trick to getting interesting layers is to alternate colors and dry the layers between spraying.

    I then trimmed the watercolor piece into a card panel measuring 3.75″x5″. Next, I die-cut the Merry Christmas work out of the remaining inked panel. For the outline, I used watercolor cardstock.

    Next, I adhered the 3 snowflake layers together and adhered it to the inked panel. I added the sentiment below that with some foam tape. I also added a few gems to the snowflake for more bling.

    Finally, I attached the completed panel to an A2 card base. I made the card base also with watercolor cardstock so it matches the white and texture on the sentiment outline. While it is hard to see the shimmer in the pictures, this card is a lot more shiny and attractive in real life.

    This brings us to the end of today’s post. Thank you so much for stopping by and I hope to be back soon with more new card ideas.

    Supplies:

  • Warm Wishes | by Sandhya Iyer

    Warm Wishes | by Sandhya Iyer

    Hello Birch Press friends! This is Sandhya here with a fresh card to send warm wishes. It is kind of festive, more winter-like. I used the Forest Leaf and Berries Contour Layers and The Forest Canopy Layer C die sets for this card. For the sentiment, I grabbed the Warm Wishes Vintage Sentiment die.

    I started by die-cutting all the pieces from the Forest Leaf And Berries Die set out of watercolor paper. Next, I used Distress Spray Stains and Distress Mica stains to color the pieces. For the smaller pieces like the berries, it is easier to use tweezers and dip them into a buddle of color and then lay them out on a craft mat to dry.

    For the delicate branch, I used an ink blending tool and dabbed over it with Ground Expresso Distress Ink. Once all the colored pieces were dry, I assembled the berries and leaves per the instruction leaflet.

    Next I die-cut the Forect Canopy Laver C out of Watercolor cardstock 2 times. I adhered the 2 layers together to create more dimension and then adhered it down on a white A2 card base. Then, I die-cut my sentiment and placed it towards the entre of the background.

    Finally, I arranged the berry clusters and leaves around the sentiment and adhered them down with liquid adhesive. I also added a few flatback pearl embellishments to tie it all together. While it is hard to see the shimmer in the pictures, this card is a lot more shiny and attractive in real life.

    This brings us to the end of today’s post. Thank you so much for stopping by and I hope to be back soon with more new card ideas.

    Supplies:

  • Autumn Hugs | by Sandhya Iyer

    Autumn Hugs | by Sandhya Iyer

    Hello Birch Press friends! This is Sandhya and I am back with a fall card featuring the Adornment Oak Leaf die set. It was a fun card with just die-cutting all the way and no stamping at all!

    I started by die-cutting the detailed layer of the oak leaf out of gold cardstock from the Memory Box Rainbow Reflection Mirror pad. Then, I used the Big Hugs Sugar Script die to cut out my sentiment from the same gold cardstock and set it aside. Next, I cut out the shadow layer of the leaf as well as the sentiment out of white cardstock.

    I used Distress inks in yellow and orange to ink blend an ombre effect on the solid layer of the leaf. Then, I adhered down the gold leaf over the ink-blended layer. Next, I trimmed a panel out of white cardstock to measure 3″x 5.25″ and die-cut it using the Pinpoint Radial Plate. For the card base, I chose a deep orange cardstock from my stash.

    Finally, I assembled the card using liquid adhesive and foam tape to pop up the sentiment die-cut. I also added a few flatback gold embellishments to tie it all together. This brings us to the end of today’s post. Thank you so much for stopping by and I hope to be back soon with more new card ideas.

    Supplies:

  • Autumn Thanks | by Sandhya Iyer

    Autumn Thanks | by Sandhya Iyer

    Hello Birch Press friends! This is Sandhya and I am super thrilled to be a part of the Birch Press design team and look forward to sharing my ideas and creations with all of you. I will start off with a couple of ‘thank you’ cards using the gorgeous new Adornment Wreath die set. It was fun playing with the delicate leaves as well as filling them up with leftover die-cuts.

    I started by trimming a piece of copper cardstock from the Memory box Glitzy Glitter Pad to a 4.25″x5.5″ panel. Then, I centered the detailed part of the Adornment Wreath die right in the middle of that panel and die-cut the wreath. I made sure to save the loose leaves that fell out of the die-cut wreath. Next, I used the Big Thanks Sugar Script die to cut out my sentiment from the same glitter panel and set it aside.

    Then, I trimmed a panel out of white cardstock to measure 4″x5.25″ and gently ink-blended around its edges with Antique linen Distress ink. I die-cut the wreath shadow layer out of white cardstock and ink blended over it with orange, yellow, and green inks and smaller-sized blending brushes.

    Now that I have all the bits and bobs ready, I assembled my card using glue and foam tape. First, I aligned the delicate glitter wreath over the ink-blended shadow and filled some of the gaps with solid leaf die-cuts. I didn’t add much glue towards the outer edges and gently lifted the glitter cardstock for added dimension. I adhered this down on the ink-blended panel and added the thanks sentiment using thin foam tape. Finally, I matted this panel with the glitter panel I used for diecutting and adhered it to an A2 card base.

    As I was creating this card, I had another idea to use the solid leaves to fill out the wreath a bit more. So I ended up creating another fun card to give this a try. For this card, I cut the wreath out of gold cardstock from the Memory Box Rainbow Reflection Mirror pad. I cut the solid shadow layer out of white cardstock and set them aside.

    Next, I stamped my sentiment from the Classic Sentimental Wreath stamp set on white cardstock and heat-embossed it in gold. I added a gold mat for my sentiment strip for added glam. Then, I went to play with a piece of watercolor paper and ink smooshing with Distress Oxide inks in fall colors – Crackling Campfire, Mustard Seed, and Mowed Lawn.

    I inked around the edges in orange and popped the watercolor panel on an A2 card base with foam tape. Next, I aligned the gold wreath imperfectly over the white solid layer and adhered it to the inky panel with foam tape. I went on to tuck the solid golden leaves to fill out the wreath. I just fell in love with this look and might just create this look in different colors now. Anyways, I went on to add the sentiment strip and finish this card. I would love to know your thoughts on my cards and if you will give any of these a try. Thank you so much for stopping by today.

    Supplies:

  • Blue Balloons | by Crystal Komara

    Blue Balloons | by Crystal Komara

    Hello crafty readers! This is Design Team member Crystal Komara here to inspire you today with a birthday card using a lot of texture from glitter paper to alcohol inks. It’s also in my favorite color – blue! And. . . it sparkles!

    The base of this A2 size card is made from 80 lb. Neenah Solar White Smooth cardstock. Using Plate A only from the Viola Layering Plates, I cut this background from white cardstock and adhered it directly to the card base. ( I actually cut two of these backgrounds, so that I could fussy cut some of the flowers to add to the balloons). Using Layer Plate C of the Floral Balloons I cut two balloons. The first was from silver glitter paper and the second was from a little scrap piece of an alcohol ink background that just happened to coordinate!

    I fussy cut two of the flowers from the Viola Layering Plate A and adhered them to each balloon. I adhered each balloon to the card using 3M foam adhesive for added dimension.

    I die cut the sentiment using the Make a Wish Sugar Script die. I die cut the bottom layer from blue glitter cardstock and the top layer from white cardstock. I adhered the two layers together with a fine-tip liquid adhesive. Lastly, I adhered the entire sentiment to the card using 3M foam adhesive for added dimension.

    I hope you like today’s card! Thanks for visiting and have a wonderfully creative day!

    Supplies

  • Best Wishes On Your Journey Together  | by Crystal Komara

    Best Wishes On Your Journey Together | by Crystal Komara

    Hello friends and happy May! I feel like May is the unofficial start to summer, which also means that wedding season is upon us. This is Design Team member Crystal Komara here today to inspire you with a wedding/love themed card using a variety of product from Birch Press Design.

    Card details:

    The base of this A2 sized card is made from 80 lb. Neenah Solar White smooth cardstock. This is my go-to white cardstock for e-v-e-r-y-t-h-i-n-g! To create the background of this card I used Layer Plate C of the Flora Plate Layer set, and I die cut it from white cardstock. I mounted that die cut piece onto a piece of white cardstock for a white-on-white look and then mounted both pieces onto black cardstock before adhering it to the card base.

    For the largest heart I used the Flora Heart Layer C. I die cut Layer A and Layer B from red cardstock. I adhered the two layers together with a fine-tip liquid glue. Then I adhered those of a piece of white cardstock and fussy cut a heart shape background. I adhered this heart to the card using 3M foam adhesive for added dimension.

    To create the two smaller hearts, I die cut Layer A of the Kinsley Heart Layer Set from white cardstock. I adhered this over a sheet of red cardstock and then fussy cut the individual hearts out.

    For the sentiment, I stamped the font in black ink on white cardstock. This sentiment is from the Kind Hearts clear stamp set. I then used a heart punch to punch the sentiment out. I adhered the sentiment too the card using 3M foam adhesive.

    I hope you have enjoyed today’s card. Thank you for visiting and have a wonderfully creative day!

    Supplies

  • Prime Peony Hello | by Crystal Komara

    Prime Peony Hello | by Crystal Komara

    Hello readers! Now that spring is officially here (oh but wait, is it??) Oh well, I declare spring IS here! Let’s celebrate with all things floral. This is Design Team member Crystal Komara here with you today sharing this hello card made using the Prime Peony Duo Contour Layers.

    Card details:

    The base of this A2 sized card is made from 80 lb. Neenah Solar White Smooth cardstock. I cut a 5 1/4″ x 4″ piece of the same Neenah White cardstock and ran it through my Big Shot using the Blooming 3D embossing folder from Memory Box Co. (a sister company of Birch Press Design). I adhered this embossed background directly to the card base. Next, I die cut a large oval from white cardstock.

    To create all the peonies, I die cut the various layers of the Prime Peony from different colored pink cardstocks and then using the image provided, I was able to assemble them (with only limited curse words!) Trust me, I’m not proud of my less-than patience.

    After adhering all the peony pieces together I adhered them to the card using 3M foam adhesive for added dimension. Lastly, for the sentiment, I used the Big Hello Sugar Script die. I die cut just the top layer (not the shadow layer) from white cardstock. I cut this layer three times and them on top of each other before adding them to the card.

    I hope you have enjoyed this card! Thanks for visiting and have a wonderfully creative day!

    Supplies

  • Shaker Star Flowers | by Crystal Komara

    Shaker Star Flowers | by Crystal Komara

    Hello readers and happy Wednesday! This is Design Team member Crystal Komara here today sharing one of my favorite (and seemingly easiest) interactive cards to make – a shaker card! I made this card very monochromatic in purple and white, but if purple really isn’t your color, there are endless possibilities and color combinations you could use instead with these beautiful Star Flowers Contour dies.

    Card details:

    The base of this A2 sized card is made from 80 lb. Neenah Solar White Smooth cardstock. For the background, I cut a 5 1/4″ x 4″ piece of the same Neenah White cardstock and ran it through my Big Shot using the Pinpoint Radial Plate.

    Using the Star Flowers Contour Dies, I cut the flowers from two different colored purple cardstock and one purple glitter cardstock (for the center of the flowers). I adhered the layers of the flowers together with a fine-tip liquid glue.

    To create the shaker component, I die cut Layer A of the Roundabout Layer Set from white cardstock. I then fussy cut a solid white background of this same shape to create a white frame. I adhered a piece of clear acetate to the back of this frame. I added about 1 tablespoon of sequins to the card and then layered the shaker frame on top.

    I stamped the sentiment “to my friend” in purple ink on white cardstock and used a circle punch to punch it out. This sentiment is from the Kind Hearts clear stamp set.

    I love a card that can be made so easy to change simply by alternating the colors or the sentiments. Thanks for visiting and have a wonderfully creative day!

    Supplies

  • You Are Loved Easter Egg | by Crystal Komara

    You Are Loved Easter Egg | by Crystal Komara

    Hello readers and happy Tuesday! This is Design Team member Crystal Komara here with you today sharing a beautiful Easter card for the upcoming holiday using the Petal Egg Layer Set and a few other products from Birch Press Design.

    Card details:

    The base of this A2 sized card is made from Neenah Solar White Smooth cardstock. For the first 5 1/4″ x 4″ layer, I ran a piece of the same Neenah white cardstock through the Blooming 3D embossing folder by Memory Box Co (a sister company of Birch Press Design).

    Next, I created the layers of the Easter egg from the Petal Egg Layer set:

    Layer A – the top layer was die cut from white cardstock.
    Layer B – the middle layer was die cut from yellow glitter cardstock.
    Layer C – the bottom layer was die cut from a darker yellow cardstock.
    I fussy cut the base or bottom layer of the egg in yellow cardstock, so that it would help the egg standout against the white background.

    I adhered all four layers of the egg together using a fine-tip liquid glue. Once this was dried, I placed the egg in the center of the card. Then I used the Tiny Tuft Flowers and Leaves Contour dies. I cut the leaves from two different colored green cardstock and the flowers from both yellow cardstock and yellow glitter cardstock.

    I adhered the leaves and flowers to the lower right side of the egg using a fine-tip liquid glue.

    Using the You Are Loved Noted Script heat foil plate and die, I heat foiled the sentiment in gold foil on black cardstock. I used the coordinating die to die cut the sentiment out and adhered it over the egg using 3M foam adhesive for added dimension.

    I hope you have enjoyed today’s card! Thank you for visiting and have a wonderfully creative day!

    Supplies